基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

单气室固体氧化物燃料电池的材料、微堆结构与相关应用

单气室固体氧化物燃料电池（SC-SOFC）是一种整个电池处在单一气室中,阳极和阴极分别对混合气体中的燃料和氧气进行选择催化产生电动势的特殊结构燃料电池. SC-SOFC因其独特的原理和结构而具有无需密封、易于堆叠、可以快速启动和不易发生积碳等诸多优点,有很大的应用潜力. 作者在SC-SOFC的原理和特点的基础上,系统地总结了SC-SOFC所用材料、微堆结构设计、衰退机制及应用方面的研究进展;以提高SC-SOFC微堆的输出电压和功率为目的,改进预混气体环境下运行的微堆结构,采取星型布局的四电池微堆其输出功率提高到420 mW;随后,逐步改进供气方式,结合计算流体力学数值模拟研究,提出了单路多点供气和双路多点供气模式,成功地将单个SC-SOFC微堆模块的输出功率提升到8.178 W,进而开展了微堆模块外部串并联和与燃烧器的结合实验验证. 研究结果表明,SC-SOFC可以很便捷地连接成微堆模块并产生数瓦的输出功率,未来有望用于以供热为主型的热电联供系统. 作者还借助原位电阻和开路电压的原位同步测试,阐明了Ni在CH₄-O₂气氛中的反复氧化-还原循环是SC-SOFC发生不可逆衰退的主要机制,这一发现后来催生出氧化-还原法制备多孔金属的新技术.     

聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

An electrochemical sensor based on Pt nanoparticles decorated over-oxidized polypyrrole/reduced graphene oxide nanocomposite for simultaneous determination of two neurotransmitters dopamine and 5-Hydroxy tryptamine in the presence of ascorbic acid

Abstract

In this study, the Pt nanoparticles/over-oxidized polypyrrole nanofiber/reduced graphene oxide (Pt NPs/OPPy/RGO) nanocomposite was electrochemically synthesized and used to modify a glassy carbon electrode. To confirm the Surface morphology and characterization of the nanocomposite, field emission scanning microscopy (FE-SEM), X-ray diffraction (XRD), Raman, FT-IR, and X-ray photoelectron spectroscopy (XPS) were used. Simultaneous determination of these species showed one linear response 0.1–250.0?μM and two linear responses 0.5–10.0?μM and 10.0–470.0?μM, with detection limits 42?nM and 106?nM (S/N?=?3) for DA and 5-HT, respectively. Finally, the analytical application of this modified electrode was investigated in the human blood plasma.     

Magnetite nanoparticles−based hydroxyl radical scavenging activity assay of antioxidants using N,N-dimethyl-p-phenylenediamine probe

Excessive amounts of reactive oxygen species (ROS), unless counterbalanced by antioxidants, can cause cellular damage under oxidative stress conditions; therefore, antioxidative defenses against ROS must be measured. With the development of nanotechnology, nanoparticles have found numerous applications in science, health, and industries. Magnetite nanoparticles (Fe ₃ O ₄ :MNPs) have attracted attention because of their peroxidase-like activity. In this study, hydroxyl radicals (•OH) generated by MNPs-catalyzed degradation of H ₂ O ₂ converted the N,N-dimethyl-p-phenylenediamine (DMPD) probe into its colored DMPD•+ radical cation, which gave an absorbance maximum at λ = 553 nm. In the presence of antioxidants, •OH was partly scavenged by antioxidants and produced less DMPD• ⁺ , causing a decrease in the 553 nm-absorbance. Antioxidant concentrations were calculated with the aid of absorbance differences between the reference and sample solutions. The linear working ranges and trolox equivalent antioxidant capacity coefficients of different classes of antioxidants were determined by applying the developed method. In addition, binary and ternary mixtures of antioxidants were tested to observe the additivity of absorbances of mixture constituents. The method was applied to real samples such as orange juice and green tea. Student t-test, F tests, and the Spearman’s rank correlation coefficient were used for statistical comparisons.     

A General Catalyst Based on Cobalt Core–Shell Nanoparticles for the Hydrogenation of N-Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica-supported Co/Co₃O₄ core–shell based nanoparticles prepared by template synthesis of cobalt-pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2-a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.     

Recent developments of metallic nanoparticles and their catalytic activity in organic reactions

During the last two decades, with the development of nanotechnology, various nanomaterials have been designed and generated. Among them, hybrid organic–inorganic nanoparticles as a particular immobilizing carrier of the catalyst active sites have shown an important contribution in the current research studies. This is due to the large area and loads of active sites. This prominent review is focused on the novel various exa about the immobilization of nanoparticles with organic compounds as versatile and efficient catalysts in organic syntheses.     

Theoretical studies on the influence of metallic cations on ring opening of propylene oxide catalyzed by metal-salen complexes

We studied the ring opening of propylene oxide (PO) by salen-M coordinated OH⁻ group [M = Al(III), Sc(III), Cr(III), Mn(III), Fe(III), Co(II), Co(III), Ni(II), Cu(II), Zn(II), Ru(III) and Rh(III)]. The results show that the ring-opening energy barriers for M(II) complexes are much lower than those with M(III) complexes in the gas phase, and the barriers correlate linearly with the negative charges on the OH⁻ group and the Fukui function condensed on the OH⁻ group. The nucleophilicity ordering in the gas phase can be rationalized by the ratio of formal positive charges/radius of M cations. Solvent effect greatly increases the barriers of M(II) complexes but slightly changes the results of M(III) ones, making the barriers similar. Analysis indicates that the reaction heats are linearly proportional to the reverse reaction barriers. The relationships established here can be used to estimate the ring-opening barriers and to screen epoxide ring-opening catalysts.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。